Imagine HiFi
Top » Catalog

   Categories
Accessories & DIY->
Cables-> (1)
Electronics-> (43)
Furniture-> (9)
Music
Speakers-> (27)
Video->
Special (Limited Qty) (2)
______________________
One of a Kind

  Clearance (Make an Offer)

  Deals of the Week

  Package Deals


   Manufacturers

       

 
View live Auctions
  

      

 

 

 

 
What's New?

______________________________________________

 

Available Now... Finally!

 

 

Is this the most advanced A/V receiver on the planet? Thanks to its Trinnov Optimizer Room Correction system, the Sherwood Newcastle R-972 just may be.

This flagship receiver in the high-performance Sherwood Newcastle line-up, winner of the Innovations 2008 award at this year뭩 Consumer Electronics Show, delivers 100 watts RMS per channel to 7 channels, provides lossless audio decoding for Blu-Ray and HD-DVD discs via dual Ti 32-bit DSP chips and is HDMI 1.3 enabled with 1080p video scaling via its Silicon Optix Reon processor.

But the reasons that the R-972 has been described as a 밽ame changer?among A/V components is that it is the first consumer product to feature the $13,000 Trinnov Optimizer Room Correction system. (More on that below, after we finish the basic overview).

For video, the receiver has four HDMI 1.3 inputs and 7 analog video inputs, and is able to convert legacy analog video to HDMI. It can scale all video to resolutions up to 1080p, is capable of 36-bit 밆eep Color?and provides a simple, one-wire hook-up to advanced video displays. It comes with a dual-mode (RF + IR) remote control, 12-volt triggers and can also be controlled from its RS-232 communications port.

The R-972 is fully equipped for whole-house audio/video. It supports 3-Zone operation with independent preamp level audio and video available for Zone 2 with audio only, available in Zone 3. The R-972 can use the rear-center surround amplifiers to fully power the speakers for Zone 2 or it can be configured in Room 2 Automatic mode. When in Automatic, the receiver changes from 7.1 operation to 5.1 plus stereo (for Zone 2) when required, preserving the complete presentation in the main room.

With an MSRP of $1799.95, the R-972 is expected to be available late this fall.

The Trinnov Optimizer: A $13,000 - professional system in the home!


Described by audio professionals as 뱋ne of the most significant audible enhancements we뭭e ever encountered?and a 뱊ew benchmark,?the R-972 with the Trinnov Optimizer performs like no other equalization system ever before. This 밽ame changer?product brings the technology found in 20th Century Fox뭩 mix rooms and other professional facilities around the world into the home for the very first time.

Conventional equalization, especially in home systems, has always been limited in its ability to improve acoustical performance. Even the latest advanced room correction systems are able only to compensate for deficiencies and errors in loudspeaker frequency response on a speaker-by-speaker basis. And at their best, these systems are unable to do anything to recreate the soundfield of the original performance or sound mix.

Like conventional equalizers, the Trinnov system flattens the frequency response of the system, providing an immediate sonic improvement. But the Optimizer goes far beyond, with an ability to adjust level, phase and time that gives users an unprecedented ability to control the soundfield. It can actually compensate for less-than-ideal speaker location and room boundaries in a way never possible before. It can literally re-position the acoustic location of each channel electronically, so that the acoustic images of a recording are correctly positioned.

This also means that a center channel image can be positioned where it belongs: at screen center, even when the actual center channel speaker is located below the screen. In fact, the Optimizer effectively creates a 360?acoustical space enveloping the listeners, with correct acoustical imaging, regardless of the location of the speakers.

At setup, using a special four-microphone acoustic probe, the Optimizer measures the system, including the physical location of each speaker and its frequency response. It then determines the necessary corrections and applies the appropriate filters to accomplish the desired correction.

Then the user can take advantage of perhaps the most intriguing aspect of the Optimizer ?the ability to produce in the listening room the original acoustic waveforms at the location where the mixing engineer created the final audio mix. This is the Holy Grail of audio reproduction, but how is it possible?

The Optimizer is able to do this because of professional audio practices that are used throughout the world for multichannel mixing. Film mix facilities, whether small room or large dubbing stages, tend to configure their speakers to standard listening angles relative to the mixer뭩 position. The Optimizer is configured for optimum surround playback in the home, based on Trinnov뭩 research of these mixing practices, allowing it to deliver precise acoustical imaging per the original soundtrack mix.

Simply select the SMPTE Cinema setting on playback, and the Optimizer will map the sound to the correct channel locations, in any listening room, producing the sound heard by the mixer when the mix was created! For multichannel music, a standard called the ITU Standard for Surround Music specifies speaker angles for optimum music reproduction, and the Optimizer gives users this an ITU Surround playback setting for the best possible surround music.

The Optimizer can even move the entire soundfield laterally if needed, extremely useful in rooms where the speakers are not arranged symmetrically around the TV. Let뭩 say the display is near a corner, not located between the left and right front speakers because of a fireplace. In this room, the soundfield can be effectively rotated so the center channel sound comes from the screen, with the other channels coming from the correct locations! Three separate sound stage orientations can be stored, allow listeners to switch back to a normal soundstage from the left and right speakers for two-channel music.

Within each of the spatial options, users can tune the response of their system to one of several target response curves. Any curve can be assigned to any input, allowing listeners to easily change system tuning for playback of each source according to individual preference (different settings for music than for film, for example). These choices include "Natural", very useful for music, that provides a +2 dB bump on all channels below 100 Hz and a gentle roll off above 9 kHz; 밊lat? perhaps more useful for studios than homes; 밊ront?for listeners with full-range left and right speakers that want the Optimizer bypassed for two-channel music, and 밄ass? which operates on all channels only below 300 Hz.

The result is a level of clarity and spatial accuracy rarely if ever heard in a home environment, with a 360?soundfield and sharp imaging in both the front and the back of the room. Listeners the can hear 밿nto the mix,?and there is an uncanny, distinctive sense of 뱑ightness?to the sound that makes listening effortless and non-fatiguing.

HOW IT WORKS

The advanced mathematicians and acousticians that developed the Trinnov Optimizer set out to recreate the 3-dimensional soundfield of the original performance. In this endeavor, accurate channel-by-channel frequency response is only a starting point. Trinnov뭩 task also required the ability to accurately measure and then relocate the apparent sound source until it was identical to the original.

Using an Acoustic Probe with four microphone capsules, the system measures the response of each speaker, the room modes, and the physical location of each speaker in 3 dimensions, with measured speaker distance accurate to + 1 centimeter, and speaker elevation and azimuth accurate to + 2 degrees!

Then the Optimizer calculates appropriate playback filters and uses the calculated digital IIR and FIR filters to optimize both speaker response and speaker placement.

Once the R-972 has made its system measurements, the system will document the changes it makes, along with speaker positions, and users can write stored performance data to the R-972뭩 USB jack and even print it. Users can upload their stored data to the Trinnov website and print before-and-after graphs of their system. It뭩 even possible to download new target curves, allowing users to match the sound of their system to alternate setups and to match specific playback material.

Key Features of the Sherwood Newcastle R-972
HDMI 1.3, capable of 36-bit 밆eep Color?video
Lossless Audio: DTS Master Audio HD; Dolby TruHD
DTS 96/24; Neo 6 Cinema & Music
Dolby: Dolby Digital +, ProLogic IIx; Virtual Speaker; Headphone
PCM: 96 kHz Multichannel; 192 kHz Stereo
Converts analog video to HDMI
Silicon Optix Reon can scale all video to 480p; 576p; 720p;1080i;1080p
Universal Video?Transcodes Composite & S-Video to component
XM Radio 밅onnect and Play?with Neural Surround
Advanced GUI On Screen Display via HDMI
Upgradeable Firmware
Bi-Directional RS-232 Serial jack/USB Input and output
12 Volt triggers
7.1 Channel Direct Analog input
24-bit A to D and D to A converters
Optical/Coaxial Digital Inputs
Optical Digital Output
Independent Room 2 A/V Output
Independent Room 3 Audio Output
On-Screen Display from HDMI and analog video outputs
Dual Mode?RF + IR Preprogrammed and Learning Remote Control
A/V Synch Delay by input (0 to 200 mS)

 

Trinnov Optimizer
Includes 4 microphone capsule Acoustic Probe
Measures speaker location & response in 3 dimensions
Uses FIR and IIR filters to flatten speaker response
Re-Maps loudspeakers?acoustic position to recreate original soundfield
Supports ITU Surround Music and SMPTE Cinema Standards
Writes before/after curves to USB output for Internet analysis
USB input allows user to upload new target curves

 

Audio/Video Features
Dual Texas Instruments 32-bit DSP processors
Multiple DSP Modes
Digitally Re-Master PCM to 96 kHz/24-Bit
Pre-amp Outputs: L, C, R, LS, 2 CS, RS, Subwoofer
4 HDMI Input and 1 Output
3 Component Video Inputs and 1Output
Audio Inputs/out (including tuner): 8/2
Front Panel A/V Input /with Toslink
Front Panel Audio Input for portables
Automatic Room 2?(7.1 to 5.1 + stereo) operation
Quadruple Independent Crossovers
Built-in Biamp Capability
밒nstaller Custom Memory?br> Converts Remote RF commands to IR output to operate associated units
IR in / out
Programmable Video Input Labeling
Cinema EQ

Tuner Features
4-Gang Quartz PLL Synthesized Tuning
XM Connect & Play with 30 presets
30 Station Presets (Random) with Preset Scan

______________________________________________

    New Products For February    
SA-50
SA-50
$4,999.99
SA-50
SA-50
$5,800.00
PerfectWave Dac
PerfectWave Dac
$2,999.99
PerfectWave Transport
PerfectWave Transport
$2,999.99
Power Plant Premier (Black)
Power Plant Premier (Black)
$1,599.99
R-972
R-972
$1,799.99
Sonoma
Sonoma
$1,299.00
Hampton
Hampton
$1,299.00
Geneva
Geneva
$1,899.00
 

   Resources
About Us
Shipping Timeline
Events
Portfolio
Testimonials
Contact Us

 

   Reviews
There are currently no product reviews

 


Copyright © 2010 Imagine HiFi
by pluswebsolution.com